Find Your Nearest Display:

Enviro Log Kit

Enviro Log Kit PDF »

Enviro log kit setup step one

Enviro log kit setup step two

Enviro log kit setup step three

Enviro log kit setup step four

Enviro log kit setup step five

Enviro log kit setup step six

IMPORTANT: It is important that the flame igniters, flame sensors and burners are not in contact with any Log. This can cause the unit to malfunction. The flame sensor should sit approx. 10mm off the burner The igniters should sit approx. 5mm off the burner.

Heatmaster enviro embers

1. Take care when handling embers and wash hands immediately after use.
2. Optional embers are to be placed around the burner ports to simulate the glowing look of a traditional fire place.
3. Use only a tiny amount and save the remaining.
4. Pull apart into fine and thin pieces and do not stack or overload.
5. It is important that you only place a small amount of embers around the ports and make sure you stay away from the flame igniters and flame sensors as this can cause the unit to malfunction.

Enviro log kit setup step seven

Enviro log kit setup step eight

IMPORTANT: It is important that the embers are clear of the flame igniters and flame sensor, if not his can cause the unit to malfunction. The flame sensor should sit approx. 10mm off the burner The igniters should sit approx. 5mm off the burner.